Installing python packages while building custom Raspberry pi OS

[Beebeejohn]

How to install python packages like Adafruit.ads1x15.ads1115,busio,time,json,logging while building raspberry pi Os using piemann

[eugulixes]

1. You have to add a post-install hook to devices/rpi-2-b/raspbian-buster-armhf/post-install. The hook might look like (I named it run-pip3.sh)

   #/bin/sh
   pip3 install adafruit-circuitpython-ads1x15 adafruit-circuitpython-bme280

2. Run sudo env INCLUDES=python3-pip ./pieman.sh

[Beebeejohn]

Actually where this run-pip3.sh is there? Can you tell me the path. I searched it . But I could not get it. And also this command where should I mention pip3 install adafruit-circuitpython-ads1x15 adafruit-circuitpython-bme280. Should I mention this line in pieman.sh script

[eugulixes]

1. Go to devices/rpi-2-b/raspbian-buster-armhf/
2. Create a directory named post-install and go to the directory
3. Create a file named run-pip3.sh with the following contents

   #/bin/sh
   pip3 install adafruit-circuitpython-ads1x15 adafruit-circuitpython-bme280

4. Run sudo env INCLUDES=python3-pip ./pieman.sh

And also this command where should I mention pip3 install adafruit-circuitpython-ads1x15 adafruit-circuitpython-bme280. Should I mention this line in pieman.sh script

No, you don't have to touch pieman.sh.

[Beebeejohn]

Ok. Thank you so much for the replies. If I want to install multiple python packages like adafruit-blinka, adafruit-io, In the pip3.sh file, should I mention the contents as follows:
pip3 install adafruit-circuitpython-ads1x15 adafruit-circuitpython-bme280
pip3 install Adafruit-Blinka
pip3 install adafruit-io
Can you tell me

[eugulixes]

yeah, you can either use multiple lines like that or put it in one line as pip3 install adafruit-circuitpython-ads1x15 adafruit-circuitpython-bme280 Adafruit-Blinka adafruit-io

[Beebeejohn]

ya ok thank you

[Beebeejohn]

I tried with the above command as mentioned. But adafruit-blinka and ads1115 packages are not getting installed in python. It is showing no module found error. Can you tell me the exact command for installing supervisor, ssh and also python packages like adafruit-blinka, etc., in a single command itself . Because I need supervisor, ssh also along with python packages. I tried with this command sudo env INCLUDES=ssh,supervisor,python3-pip ./pieman.sh. But it is showing no module found error for adafruit and supervisor is installed properly without any issues Can you tell me the command please? Whether do I need to use env also or not needed?

[Beebeejohn]

Can anyone pls answer my above question?

[eugulixes]

Fortunately or unfortunately I'm not able to read people's mind, so 1) explain what you did step by step, 2) attach some tracebacks or anything else what could help me or anyone else to help you.

Can you tell me the exact command for installing supervisor, ssh and also python packages like adafruit-blinka, etc., in a single command itself

There is no a single command because you have to install Python packages via pip3 and hooks as I mentioned above.

Whether do I need to use env also or not needed?

It depends your task.

[Beebeejohn]

The steps I followed are below:

1. I entered Wi-Fi SSID and password details in pieman.sh script and enabled wireless is equal to true then made DEVICE="rpi-zero-w"
2. I created new folder named post-install under devices/rpi-zero-w. (Because the raspberry pi, I am using for this experiement is raspberry pi zero -w) I created one file in that directory run-pip3.sh. The following contents are there in that file
   pip3 install adafruit-circuitpython-ads1x15 Adafruit-Blinka adafruit-io
3. Then I tried installing python packages and supervisor in the terminal while building raspberry pi OS by the following command
   sudo env INCLUDES=ssh,supervisor,python3-pip ./pieman.sh
   If I tried the above command, python packages are not getting installed. Only supervisor is installed properly. Now can you get my question what I am asking?

[eugulixes]

Yeah, the problem is

1. You have to create post-install under devices/rpi-b/raspbian-buster-armhf (actually in devices/rpi-zero-w/raspbian-buster-armhf but it symlinks to devices/rpi-b/raspbian-buster-armhf).
2. You're building the image for RPi 3 but not for RPi Zero W. Try sudo env DEVICE=rpi-zero-w INCLUDES=ssh,supervisor,python3-pip ./pieman.sh

[Beebeejohn]

Thank you. Will try like as u mentioned and check

[Beebeejohn]

I tried with the above commands as you mentioned. But still python packages are not getting installed