Skip to content

README-en.md

Latest commit

 

History

History
186 lines (139 loc) · 12 KB

README-en.md

File metadata and controls

186 lines (139 loc) · 12 KB
Raw

Enlish | 简体中文

Workflow Status

Kernel Manifest Dynamic Kernel Manifest Kernel Manifest Appendix Fengchi Kernel

Channel Coolapk

zakozako~

Action-Build

Prohibit the promotion of forked repositories with no modifications; see LICENSE

Click to view how to fork the project

Please note, if you want to use other branch manager projects, make sure to disable 'Copy the SukiSU-Ultra branch only' when forking.
Click to view how to sync the forked project to the latest

Please sync promptly! Some updates may cause older versions to fail! If it still fails after syncing, delete and fork again! If the issue persists, then submit an issue for feedback.

Announcements

Note

The final _？ suffix in the configuration file represents the code name of the Android version you are currently using.Most entries without a suffix correspond to the factory default Android version. Starting from Android16, the suffixes are recalculated beginning from _b. To determine which Android version a configuration applies to, manually open the list and change the suffix to another code name—provided that the corresponding suffix actually exists.

Click to view the Android version codes

_？ Android19 (？)

_？ Android18 (？)

_c Android17 (Cinnamon Bun)

_b Android16 (Baklava)

_v Android15 (Vanilla Ice Cream)

_u Android14 (Upside Down Cake)

_t Android13 (Tiramisu)

_s Android12 (Snow Cone)

Important

Data reference on the question of how long to run

Average Duration Range Maximum Duration
Ultra-fast build for all devices 1st:17min ~ 36min 2nd:6min ~ 17min 40/29min
Kernel versions 5.10-5.15 built using official script 29min ~ 35min 45min
Kernel versions 6.1-6.12 built using official script 59min ~ 1h12min 1h28min

Using ccache may slow down the first build; this only applies to ultra-fast builds.

Differences in repo tool versions may affect the build time.

So, if your build time exceeds the maximum time for your model, please stop and rerun, and check the steps, especially the Initialize Repo and Sync step. This often fails due to upstream REPO toolchain issues. If this step takes more than 15min, try again. If it still fails, wait for a fix

Caution

Do not use volume down to install modules during root-retaining updates, use volume up to skip! Generally, installation is no longer necessary, just use the SukiSU Ultra Add-on Module

If you have enabled the ZRAM algorithm, make sure to install the ZRAM module before rebooting after flashing with Anykernel3. You may need to adjust some parameters manually.The 5.10 kernel is not supported ZRAM , as the zram.ko module path could not be found.However, the generated Anykernel3 is still usable

MTK devices do not support enabling network feature extensions and do not support disabling fast build

OnePlus Ace5 does not support enabling Fengchi. Older models cannot use it even if the kernel includes it — do not force it

CAll Build Start UP is an extremely dangerous new workflow.It has no new features and everything remains default and non-customizable.This workflow is strictly prohibited for regular users and should use Build All OnePlus Kernels instead!

Features in Development

  • Kexec Kernel Hot Swap Support
  • Full support for all kernel versions of Fengchi
  • Toothpaste should be squeezed bit by bit, GPUs should be cut slice by slice, PPTs should be shown slide by slide, and code should be written line by line — more features and optimizations... stay tuned!

Changelog

Minor updates will be ignored. For more details, please refer to the commit.

  • Added path recursion and fully adapted the Rust build logic and bindgen / Kleaf dependencies for kernel version 6.12+; it can now be used normally.

  • lz4now automatically follows upstream upgrades and includes automatic error correction.

  • Full support for DroidSpaces+Ntsync.

  • Full support for Re:Kernel, automatically following upstream changes.

  • Multiple external warnings enabled — checks whether the fork source is normal, if the kernel suffix build time contains abnormal symbol calls, etc.

  • Complete KPN patch support.

  • ZRAM switch, algorithm name, and size can be directly adjusted in settings. Automatically handles ZRAM additional modules, with modules provided by @FURLC.

  • Full Unicode Bypass support, compatible with all kernel versions.

  • First release fixes the MTK-5.10 build errors.

  • Initial release with support for a large number of MTK devices; manifest list and path issues have been successfully resolved.

  • Supports modifying the SUSFS hash for rollback(Entering -1 in this field will disable SUSFS)、Using the SUSFS-DEV development branch.

  • For kernel versions 6.6-6.12, supports replacing the type property in the device tree from HMBIRD_OGKI to HMBIRD_GKI; supports enabling Fengchi Driver@reigadegr @cctv18 @Numbersf @HanKuCha

  • Allow calling third-party dynamic source manifest repositories to support originally incompatible devices. It is essential to ensure that the naming of the source manifest and channel branches complies with the specifications. In the third-party manifest repository's README.md, if CPUD is not defined, any placeholder value can be used,the fast build feature must remain enabled and cannot be disabled.

  • Support Baseband-guard(LSMBBG).

  • Support setting branches、custom version identifiers、fallback hash.

Set Branch: Change the original `susfs-main` to another `builtin` branch. Please modify according to the channel name in the SukiSU Ultra repository. Do not modify unless you are a developer. Do not leave it empty or remove it.
Custom Version Tag:
Replace the original commit hash with your custom content, and move the commit hash to the end. This can be modified freely, but keep it reasonably short.
v3.1.7-f5541e21@builtin
↓
v3.1.7-CustomContent@builtin[f5541e21]
If you don’t want to use a custom version tag, just leave it empty (e.g. susfs-main/).
Regardless of whether the custom version identifier and fallback hash are enabled, they must be separated by two /(U+002F) and cannot be removed

  • Fully automated retrieval of kernel information and build information.

  • Allow modifying SUBLEVEL,Used to fix the issue where the device fails to boot after a system update changes the SUBLEVEL but the kernel source has not been updated.

  • Allows running multiple workflows in batches of 9 each time.Ordinary users are prohibited from using.

  • Remove file-map and build method selection; let the main workflow decide automatically @Bouteillepleine

  • First to support custom kernel build time UTS_VERSION for all device models and all build methods.

  • Use ccache-ECS、ltothin-cache、apt-cache together to speed up the workflow, only effective when fast build is enabled.The cache needs to be regenerated by changing the key when using it for the first time or after major updates, which may reduce the speed.

You can delete all keys by enabling the "是否删除所有缓存" option in the delete.yml(name: Workflow and Cache Cleanup) workflow.
You can also go to
https://github.com/your-username/your-repository-name/actions/caches
to manually delete the corresponding keys.  
When there is a kernel-level update or a significant slowdown caused by changes in the GitHub upstream toolchain, you need to perform the above actions.

  • First to support for the kernel version 6.6+ new setlocalversion format using echo, fixing the issue where custom and randomly-generated pseudo-official suffixes were not applied. Now, this feature is fully supported across all device models and build methods.

  • Add TRUSTY_EXISTS to automatically detect whether the 6.6 kernel has defects in the kernel source code and determine whether sed is needed.

  • Fix issues where ZRAM is unusable or unable to launch non-system apps.

  • Fix the problem that the official script cannot run when the kernel version is between 5.15.0-5.15.123, and the result of the quick compilation has problems. @zzh20188

  • Allow custom kernel suffix← beta

1. When the custom kernel suffix is empty, a random string is used instead of the default “x.xx.xxx-androidxx-8-o-g3b1e97b8b29f”
2. When custom suffix is enabled, the kernel version is modified to “x.xx.xxx-androidxx-CustomContent”, and the original “androidxx-8-o-g3b1e97b8b29f” is no longer retained.
3. When using clang make (Fast Build), add the missing kernel android version number to the new source kernel information x.xx.xxx-o-g3b1e97b8b29f, and then perform operations in 1 or 2.

  • Support fast-build (5.10[Debut], 5.15[Debut], 6.1, 6.1+).

  • Support displaying user-defined inputs during Debug Show Selected Inputs step; workflow name will also reflect some values.

  • Removed potential version codes from the suffix of Anykernel3.zip config file, replaced with exact Android version numbers XX.X.(X).

AnyKernel3_SukiSUUltra_34895_OnePlusAce2Pro_Android16.0.0(5.15.180)_KPM_BBG_ILH_DS_REKER.zip
AnyKernel3_SukiSUUltra_34895_OnePlus11_Android14.1.0(5.15.123)_KPM_BBG_ILH_DS_REKER.zip
AnyKernel3_SukiSUUltra_34895_OnePlus15(AOSP)_Android16.0.0(6.12.23)_KPM_BBG_ILH_DS_REKER.zip

  • Added support for the LZ4K、LZ4KD compression algorithm in the zram module. @ShirkNeko

  • Support automatic download of latest CI version of susfs module and install via ksud; also automatically extracts different types manager CI-APK but does not install it.